Anycubic Linear Plus PSU Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The PSU mount that comes with the Anycubic linear plus delta printer mounts the PSU straight across the corner of the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The PSU mount that comes with the Anycubic linear plus delta printer mounts the PSU straight across the corner of the printer, you cannot mount it on the side of the corner extrusion so it either shoves the PSU into your face or if put on the back keeps you from pushing the printer against the wall as the PSU and power cord gets in the way.
This mount is angled to mount to the sides of the corner so you can have it mounted parallel to the bottom edges instead of straight across the corner.
It uses the screws and nuts that come with the original PSU mount.
Print Settings
Printer:
Anycubic Linear Plus
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
10%
Category: 3D Printer Parts