Whirlpool Refrigerator Door Shelf End Cap Left, Right and Shelf Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My inlaws gave us their old refrigerator when ours broke and it had some broken/missing shelf end caps, and a shelf…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 81
- Wydruki
- 2
- Wyświetlenia
- 561
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
My inlaws gave us their old refrigerator when ours broke and it had some broken/missing shelf end caps, and a shelf bar missing.
I took one of the existing ones and made a model of it, it worked out perfectly made a great replacement.
My printer wasn't big enough to print the bar in one shot as it is about 350mm wide so I split it in half and then made a 150mm pin to hold it together, the reason for such a big pin is that the center of the bar takes the most pressure/force when you are getting things in and out, if I went with a short pin it just would have snapped, as it is it turned out extremely strong.
Print Settings
Printer:
Junior
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
10%
Notes:
For the bar I printed with 0.2mm layer thickness, 10% infill and no support.
For the end caps I printed with 0.2mm layer thickness, 100% infill, and support for the end.
Category: Replacement Parts