Tevo Tarantula BLTouch mount for e3dv6 and Tevo Titan extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing is now obsolete, please look here for updated version. I made this mount as an emergency mount due to a…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This thing is now obsolete, please look here for updated version.
I made this mount as an emergency mount due to a very unleveled bed. I was using babaze's X-carriage, but my bed was too uneven to have it that far away from the hotend. I needed the BLTouch as close as possible to the hotend so I made this.
Please note that this is not an ideal way of setting your sensor since the fan mount is not totally fixed. I'm only sharing in case anyone needs it, so use it only as an emergency.
Offsets from extruder:
- Left: 0
- Right: 10mm
- Front: 0
- Back: 0
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Category: 3D Printer Parts