Raspberry Pi and 3.5 inches case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This would be at the end, a thermal camera, with an mlx90640 sensor on the front and a raspberry pi + 3.5inches screen…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This would be at the end, a thermal camera, with an mlx90640 sensor on the front and a raspberry pi + 3.5inches screen in the back, on a dual 18650 accu grip holder.
Models to be uploaded one by one..
Here is the raspberry pi case. The particularity is that I needed to use the GPIO for the screen AND the I2C ports for the thermal camera https://www.amazon.fr/gp/product/B08C4S8NPH .. so, I had to enlarge the case dimensions. It fits the pi as a glove..
I used the default GoPro+customizable+mounts,+and+a+library+to+expand model to create the gopro mounts.
When printing, juse use the side as the base.. the rest is straight . No support needed.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20
Category: Hand Tools