Jeanneke Pis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jeanneke Pis was published on thingiverse but disappeared later, repost for documentation The author is Yosuke Nakamura…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 229
- Wydruki
- 1
- Wyświetlenia
- 1118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Manneken Pis in Bruxelles is a well known fountain sculpture, here is a possible female pendant,
Jeanneke Pis
This model was published on thingiverse but disappeared later.
It is reposted for documentation
The author is Yosuke Nakamura https://www.thingiverse.com/color3djp/designs
All kudos goes to him.
The modle does in fact include the plumbing to let the waters flow circularly. With a silent pump, an additional basin and some silicone hoses you can turn the model into a fountain - you would need to print it at a larger size though.
As is, she prints at 55,7 x 55,7 x 79,3 mm and the upgoing water duct is with approx 2mm diameter. The height may set the limit but you can scale it up almost 3x and get 6mm diameter (on an Ender or clone).
The model has serious overhangs and needs carefully placed supports!