1 / 2
ALVEO3D - Free tilt stand for electronic board v2 — zdjęcie 1
1 / 2

ALVEO3D - Free tilt stand for electronic board v2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Free tilt stand for ALVEO3D electronic board v2.

Ocena
0 / 5
Polubienia
5
Pobrania
21
Wydruki
0
Wyświetlenia
197
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

=== French version below ===

If, like me, you have an Alveo3D filter (whatever the model, Alveo-ONE-R ou Alveo-ONE) and a v2 electronic board to drive it, then you might appreciate being able to place the board wherever you want in your box.
 

Alveo3D offers several free stands on its website, but strangely enough, none of them is tilted and free to be placed as you want.


This one solves this problem. Moreover, there is no need for a support to print it (if you print it face down on the printing bed).


If you like this model, please leave a little "like" and feel free to share your creations.

++++++++++++++

Si comme moi vous avez un filtre Alveo3D (peu importe le modèle, Alveo-ONE-R ou Alveo-ONE) et une carte électronique v2 pour le piloter, alors vous apprécierez peut-être de pouvoir placer la carte où vous voulez dans votre caisson.


Alveo3D propose gratuitement plusieurs stands sur son site, mais curieusement aucun qui soit incliné et libre d'être placé comme on veut.


Celui-ci résout donc cette problématique. En outre il n'y a pas besoin de support pour l'imprimer (si vous l'imprimez face contre le plateau d'impression).


Si vous aimez ce modèle, merci de penser à laisser un petit j'aime et n'hésitez pas à partager vos fabrications.

Tagi