Courner Router Template, able to do multiple sizes (metric & Imperial)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Router template with a plate and a handle for cutting various size corner rounds with a base plate covering 4 sizes
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 852
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a print of a tool i used to use and really miss in my current workshop. I therefore did a printed version.
Comprises of a base plate and a handle. 2 Base plates are included, one metric with supports for R5, R10, R15 & R20. One imperial covering 1/8, ¼, ¾ and 1'
Please note I have not yet used this on a Router table as I have designed this for an upcoming project. Please treat this as ‘Draft’ and not fully tested. If the design needs improving please leave comments and i will attempt to resolve them. I have allowed for a slight tolerance for fitment but it may need a little post processing.
Recomended to print in a heat resistant meterail such as ABS or PETG although PLA will work as well. Infill should be set high (around 35%) to provide some strength especially to the handle. I have tried to avoid overhangs therefore should not need supports to print.