Hevo Parametric Bed Bracket Type 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a different style parametric bed bracket. Both mounting screws face forward and it has a key that first in the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a different style parametric bed bracket. Both mounting screws face forward and it has a key that first in the top of the extrusion. This makes it easier to install. You can slide them in, attach the bed and then center the bed and tighten them down. They have adjustment slots for the bed screws so there is some wiggle room to get the exact fit. Because they are flush with the bottom of the extrusion, you can use oversized adjustment wheels.
Printed as is, they will fit the standard hevo with the MK2A (328mmx328mm) bed.
Note you will need M3 screws of 40-45mm.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
25
Category: 3D Printer Parts