Bburago 1/18 Scale F1 Car Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This simple piece is designed to hold the baseplate of 1/18 scale Formula 1 cars made by Bburago. I suggest printing 3…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 2549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This simple piece is designed to hold the baseplate of 1/18 scale Formula 1 cars made by Bburago.
I suggest printing 3 of these to hold your model securely (one for each side and one for the bottom).
It is possible to use screws to fix these mounts to the wall, however some strong double sided tape might be better to avoid the risk of breaking the piece while tightening the screws.
Having the two side mounts 28 cm apart should work if you want to display your car horizontally
(40% infill is used just be safe and a little less might work but proceed with caution)
Print Settings
Printer Brand:
Snapmaker
Printer:
Snapmaker 2 A350
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40%
Category: Automotive