Multiple Mechanism Auto-Rewind alternate rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are alternate racks for the Multiple Mechanism Auto-Rewind spool holder. The 21-tooth should work with the…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 218
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
These are alternate racks for the Multiple Mechanism Auto-Rewind spool holder. The 21-tooth should work with the regular holder, the longer options I use with the wall mounted version from gcode22 here.
These feature a straight gear profile, which is the correct involute for a rack. This resolved the issue I was seeing where the rack could get stuck in the fully up position due to the gears not quite meshing right. ToT has a fun video on this subject if you are interested.
Category: 3D Printer Parts