GEM Single Edge Safety Razor "ENDGEM SPEED" enders style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This SE safety razor is an Enders Speed inspired design. This razor uses the more readily available GEM blades.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 560
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
PLEASE NOTE: GEM style blades are specifically made for shaving. They are identical to the common single-edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving.
This SE safety razor is an Enders Speed-inspired design. This razor uses the more readily available GEM blades. Appropriately named "ENDGEM SPEED", this razor is very easy to maneuver, and the unique handle design provides excellent feedback.
The STL set includes one handle and three razor heads. Each razor head is marked with one, two, or three dots that indicate a different level of aggression ( 1 dot = mild, 2 dots = normal, 3 dots = aggressive ). Once assembled, it is a one-piece razor with no moving parts, just like the original Enders Speed.
07/28/26 FILE UPDATE: Added v2 of the razor head ( one for each level ).
EndGem1dot_v2.stl
EndGem2dot_v2.stl
EndGem3dot_v2.stl
The original head design has a completely floating blade edge. The new version now has supports for the blade's corners and closes the gap at both ends of the blade's edge. A small improvement was made on the spine support for easier loading and unloading. The shave performance between the original and v2 doesn't change, but the stability of the blade's edge is improved in version 2.
How to install blade:
Hold the blade by the sides with the thumb and index finger, with the edge pointing away from the hand. With the same grip, insert the spine of the blade through the front of the razor head, between the cap and the comb, and slide it into the back slot. Inspect that the blade is properly centered and that the spine is making full contact in the back slot. The cap should have good tension on the blade, and the cap's index tab should be properly seated in the blade's center slot. DO NOT INSTALL OR REMOVE BLADE FROM THE SIDES.
This is a very easy print, and the only post-processing should be the removal of the included support on the razor head and gluing the head and handle together with CA glue or similar. Additional supports are NOT needed. Please post your makes. Enjoy
Print Settings
Printer:
Tronxy XY-2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament:
Carbon Fiber and Silver Metal
Category: Bathroom