Tevo Tarantula Z Motor Stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The purpose of this compression-mounted stop is to restrict the Z travel at its minimum and maximum.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The purpose of this compression mounted stop is to restrict the Z travel at its minimum and maximum. At some point or another, we all have crashed the hot-end onto the bed or worse, the glass. After lessons learned, I now have these stops on a couple of printers and find it more pleasant hearing the stepper come to a stop then seeing scrapes and/or broken parts while I reach for the power switch or cord, For the Tarantula I suggest using two stops. Just make sure they are mounted nice and tight about 1mm below your min/max Z travel. I remixed this thingi from an awesome coupler designed by Loco http://www.thingiverse.com/thing:602481. Enjoy
Print Settings
Printer:
DIY Prusa I3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30%
Notes:
Might have to scale for proper fit.
Category: 3D Printer Parts