XYZ Da Vinci Duo - Groovemount Hotend Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds groovemount hotends to Da Vinci Duo
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed this to combine the back parts into one and adjusted the dimensions of the groovemount to fit better. This is used to add groovemount hotends (E3D, J-Head, Hexagon) to the Da Vinci Duo. I had this made by Sculpteo and it fit perfect, your mileage may vary if your printer isn't calibrated correctly. You will still need the hole layout print from the original part.
Part B is in the correct orientation for printing now, use B-Bridge if you do not want to print with support. B-Bridge has the holes closed at the end of the counterbore so it can be bridged, just drill the hole out after printing.