Compact i3 Extruder - E3D Hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a compact i3 extruder.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a compact i3 extruder I designed after looking at all the other compact designs on here. I didn't find one I liked that worked with the E3D and the MK7 hobbed pulley so I came up with my own.
You will need to print all parts, this does not use a standard X carriage. I was tired of mine failing because of the screws coming loose or other reasons so this one is connect to the extruder in 3 places.
Items required:
10 x M3 screws (not sure of lengths right now)
5 x M3 nuts
1 x MK7 Hobbed Pulley (I use the TrinityLabs version)
1 x 623 bearing
1 x Spring (I currently have springs on order from McMaster Carr, currently using 2 out of a assorted pack from Harbor Freight)
3 x LM8UU bearings
I am using the short NEMA17 sold by Qu-bd but any NEMA17 with a 5mm shaft should work.