1 / 5
Legacy Kossel Groove Mount Hotend Bowden Adapter 1.75mm — zdjęcie 1
1 / 5

Legacy Kossel Groove Mount Hotend Bowden Adapter 1.75mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This works with the Kossel effector, fits a Makergear groovemount.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
106
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

This is not for the new Kossel (Mini). This only works with the Legacy Kossel.

This works with the Kossel effector. Fits a Makergear groovemount, dimension of hole on bottom is .625" and .190" deep so if your hotend matches that it will work. Hole through center is 2mm, works with the M5 quick connects from Tri D printing but should fit all other M5 quick connects.

Fits the effectors with the 6x60* hole spacing only and only works with 1.75mm filament.

Hole spacing is 120* x 3 holes on a 50mm circle.

Instructions

Item was printed on a uPrint with soluble supports, should work fine with slicer generated supports.

Hotend groove mount can be laser cut using DXF or printed with STL, if laser cutting use 3/16" wood.

 

Tagi