1 / 2
Hot Wheels BMW M1 Procar Display (Rally Group B Theme) — zdjęcie 1
1 / 2

Hot Wheels BMW M1 Procar Display (Rally Group B Theme)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The display will fit all Hot Wheels release of the same casting.

Ocena
0 / 5
Polubienia
39
Pobrania
75
Wydruki
0
Wyświetlenia
1241
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

 

Custom display base are also available from $5! Contact me to discuss what you want!

 

If you like my work, you can support me Printables Clubs! Just click the “Support & Join”  button beside my name or here: https://www.printables.com/@GigaPenguin#join:279  

Exclusive models are included too!

 

You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts

 

Description

The display will fit all Hot Wheels release of the same casting. It is not tested with the other M1 casting from other brands, if you want the base to fit that casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L

As for why I theme this with a WRC logo on it, this specific livery was ran as a Group B rally car back then: https://rallygroupbshrine.org/the-group-b-cars/rally-cars/bmw-m1-rally/  

The display base is separated into 2 parts for easy printing and colour swap. The parts are:

1) Base
-BaseBuild.STL

2) Base back wall:
-BoxBackBuild.STL

Print Settings

Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm

Filament change layer for colours on "BaseBuild.STL":
1) Start (Line gaps colour, mine is in white)
2) Layer 16 (Overall base colour, mine is in red)
3) Layer 26 (WRC logo background, mine is in black)
4) Layer 31 (WRC logo colour, mine is in white)

Filament change layer for colours on "BoxBackBuild.STL":
1) Start (Line gaps colour, mine is in white)
2) Layer 5 Overall base colour, mine is in red)
3) Layer 8 (Overall lettering and logo background colour, mine is in black)
4) Layer 13 (:"BMW" and "M1" lettering colour, mine is in white)
5) Layer 18 (M stripe colour, mine is in blue)

Assembly

The car is tied by wires through the hole in the base

Back plate should slide in nicely into the display base.

For the blue quadrants on the BMW logo, I printed it in white then painted it with gundam pen. The darker blue line in the M logo is also painted it by gundam pen.

Others

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.

I can be contacted through Instagram or Twitter too:

Facebook: https://www.facebook.com/groups/1115757609295068
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/

Custom display base designs are available for $5! Contact me to discuss what you want!

Tagi