Filament spool holder for Elegoo Neptune (and others that use M30x1,5 thread)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holder for stock filament tube from your printer!
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 238
- Wydruki
- 2
- Wyświetlenia
- 1473
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Remixed model made by sbonnes to use stock holder tube from Neptune 2* - to save both printing time and material. Also removed holes in legs to save time and made them 1cm longer. Trimmed to flat surface, so you can add rubber pads if required.
Made (as a separate part) stabilizing bar - without it legs can bend outwards under weight of spool.
Thread was quite tight for me, so please print thread tester first :)
Printed good enough with 0,3mm layer.
Tested printers:
- Elegoo Neptune 2, Neptune 3 Pro
*it might work with other printers as well - as long as they use M30x1,5 thread, please let me know if it works, I'll update description