Print-in-place tissue box with magnetic lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tissue box. Easy to print in one go, without support and awesome magnetic lock
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 820
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is the tissue box 120x120x120 I made to be one-shot printed with no support.
I used a hinge that doesn't need screws and bolts.
(thanks to https://www.printables.com/it/model/307580-parametric-hinge)
The box remains lock with two magnets that are inserted into their slots.
I hope you like it and if you have any suggestions or requests I will do my best to make them happen.
Now 3 patterns are available: honeycomb, cube, and triangle
Enjoy!
Printing
- Material: PLA
- Layer: 0.2mm
- Infill: 15%
- Supports: NO
Parts needed
- 2 x 10x3mm magnets
Updates
- v2.1 - fix box dimensions to 250*130*60 and set hinge knuckle count from 3 to 5
- v2.0 - added 230*115*55 box
- v1.5 - added honeycomb front side and back side
Are other versions available?
If you like the model, but you have different sized magnets, like and comment. I will do my best to add all the suitable sizes.
Stay in touch!!!