Prusa Mk3S Mosquito Fan Shroud Supported
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was having trouble with the fan shroud on my Slice Engineering Mosquito modified printer drooping and crashing into…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 1123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- BSD License
I was having trouble with the fan shroud on my Slice Engineering Mosquito modified printer drooping and crashing into the print. I finally had enough and made a supported fan shroud. Don't know if this is going to work. Maybe printing this part in PETG just isn't going to work. Maybe I'll have to break down and order some ABS or PC.
** Important:
The thin horizontal blade in the front of the shroud is a removable support. Remove prior to installing.
Print instructions
Print it in something heat resistant.