K40 Lasercutter Air-Assist Nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi, This is my version of an Air-Assist Nozzle for the common K40 Lasercutter. It is intended for a 6mm outer dia. air…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi,
This is my version of an Air-Assist Nozzle for the common K40 Lasercutter.
It is intended for a 6mm outer dia. air hose.
The 4 tiny air holes in front of the nozzle are directed a little bit into the direction of the center.
Print Settings
Printer:
CTC
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
Easy to print, but don't us ABS! Use PETG instead or PLA. PETG printed at 235 degrees at the nozzle and 85 degrees for printed bed. (Celsius)
Place the nozzle with the small end directing upwards.
How I Designed This
Designed with SolidWorks 2016
File is attached
Category: DIY