Siemens Silent Power Vacuum hose connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement hose connector, as the original one is glued to the hose.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Replacement hose connector for Vacuum Cleaner:
Siemens Q5.0 extreme silencePower VSQ5X1230 / VBBS10Z5V0
Compatible to buyable part:
Suction hose with connectors / Staubsaugerschlauch mit Geräteanschlussstück
(SIEMENS 00572612)
May also fit:
BOSCH/SIEMENS Hose D266710
The hose ripped close to the handpiece, so I cut it and wanted to refit it into the connector.
But the connector was glued to the hose, I destroyed it trying to remove the glue.
I created 3 versions:
- Original Replica (not recommended for printing)
- Modified for printability (still needs support on the outside)
- Modified to screw in the hose (still needs support on the outside)
Original is made out of Nylon, I just went with ABS and for now it seems fine.
It is recommended to also glue the hose in, even for the threaded version, as this part is responsible for free rotation of the hose in the handpiece.
Printed on Ender 5 with Sunlu Transparent ABS + Heated Bed & Heated Chamber
0.3mm Layer Height
Wall order: Inside to Outside
Support for slopes greater 50°
Place with the smaller end onto the print bed.