Flat water bottle stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small stand to support slim / A5 / A6 / A7 flat water bottle.
- Ocena
- 4,5 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 2
- Wyświetlenia
- 267
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a plain (no text) stand to support a flat bottle 30mm thickness. Stand is 80mm wide.
Text can be added easily within PrusaSlicer or other slicer with similar feature.
My partner requested a stand, she loves it and more importantly sees the value in this most humble of hobbies.
Printed in white PLA+. .20mm layer height. Ready to print in default position, or it can be printed on its side for more strength using tree supports. The 2nd photo (no text) is one based on tree supports which turned out better than normal side up printing.
Adding text does add some banding effect to finished print for me, perhaps more calibration is required for a smoother finish.
Tested a few iterations (with slim bottle) to confirm stability of stand and in particular with a full bottle of water.