1 / 3
Sleeve for Drinking Bottle with Name — zdjęcie 1
1 / 3

Sleeve for Drinking Bottle with Name

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,70 € – 0,85 € netto (bez VAT)

Dla pliku: water-bottle-namen-sleeve-v2_0.4n_0.2mm_PLA_MINI_49m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,78 € netto (środek widełek).

Masa podana przez autora
9 g
Czas druku podany przez autora
48,6 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Which water bottle is mine? This problem is now solved with this sleeve!

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
210
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

Our company has given everyone a glass drinking bottle to use at the water dispenser. Unfortunately, of course, these all look the same and there is a risk of mistaking ...

With this name sleeve this is now solved!

I just had Overture PLA Silk Gold in the printer, looks a bit decadent, but feel free to use other colors :)

PrusaSlicer 2.6.0-alpha6

The model was designed directly in PrusaSlicer 2.6.0-alpha6 and the new text function was used. So you can change the name easily.

 

Printer-Settings
  • Infill: not needed
  • Brim: no
  • Supports: no
  • Layer: 0.15 mm

 

-----

Von unserer Firma hat jeder eine Glas-Trinkflasche bekommen, um diese am Wasserspender nutzen zu können. Leider sehen diese natürlich alle gleich aus und es besteht Verwechslungsgefahr …

Mit dieser Namens-Banderole ist dies nun gelöst! 

Ich hatte gerade Overture PLA Silk Gold im Drucker, sieht etwas dekadent aus, aber ihr könnt ja gerne andere Farben nutzen :)

 

PrusaSlicer 2.6.0-alpha6

Das Modell wurde direkt in PrusaSlicer 2.6.0-alpha6 entworfen und die neue Text-Funktion kam zum Einsatz. Somit kann man den Namen auch einfach ändern.

 

Drucker-Einstellungen
  • Infill: nicht notwendig
  • Rand: nein
  • Supports: nein
  • Schichthöhe: 0.15 mm

Tagi