Yet another bed leveling helper tool for Ender-3 S1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Those mounting frames are intended to be used with the Neoteck DTI Digital Dial Indicator…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 630
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Those mounting frames are intended to be used with the Neoteck DTI Digital Dial Indicator (https://www.amazon.com/gp/product/B07DFLTTQ1). It has a resolution of 0.001mm, so your printer should be pretty leveled when you finish. You can modify the attached design files if your dial indicator has different dimensions.
There are two options available. One is to put the dial indicator on the horizontal rail above the leveling screws. You have to move it manually between the left and right bed' sides. When you move it, make sure to place it in the same location.
The other frame replaces the extruder, so you can use the printer's controls to move it around the bed or create a GCode file similar to CHEP's (https://www.chepclub.com/bed-level.html).
Be careful and try not to crash the whole thing into your bed.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 S1
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
=20
Filament: PLA
Notes:
4 walls and 4 tops/bottoms
Category: 3D Printer Accessories