Unofficial MP3DPv4 Bowden Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've recently been working on building a MP3DPv4 3d printer by V1engineering. I wanted a holder for the end of reverse…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I've recently been working on building a MP3DPv4 3d printer by V1engineering. I wanted a holder for the end of reverse bowden tube. I was able to fit the holder between the two belts on the back of the machine.
I used M6 tube holders off of Amazon here: https://a.co/d/8Eh0bdT
The print is a little tight on the holders. I used a M6 tap to tap the plastic before threading them on.
The mount gets printed upside down with the flat portion on the bed and the round tube part sticking up.
It uses 2 M3x12 bolts to thread into the T-slot nuts.
Category: 3D Printer Parts