Harbor freight 4in tilt box inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
these are inserts for the harbor freight 4 in. Stacking Tilt Bin.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 269
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
These are inserts for the 4 in. Stacking Tilt Bin from harbor freight. You can use a thin piece of plastic for the front view panel sourced from just about any kids toy packaging view window.
This insert for the Harbor freight 4in tilt boxes to store more smaller screws or accessories in on box. There is a Chamfer at the bottom to somewhat lock into the bottom of the box so it need to be printed with supports touching the build plate. I can publish one without the chamfers if someone would like. I printed this set in 3 hours 5 minutes at a .28 layer height using Ender 3v2 and CHEP profiles. It took about 58 Grams of PLA+