1 / 8
Sporteq Holder Trolley Wheel Mounting Plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to make life easier to store away the dumbbell
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need:
- GBL small caster wheel
- 16 x M3 each dumbbell
Note: Depth of hole is 10mm as shown in the third image. Ensure the M3 thread does not exceed 10mm
How I Designed This
Quick overview of the steps:
- removed one of the end caps from the dumbell stand
- made a scan using a flatbed scanner
- imported this into Fusion360
- adjusted the contract and scaled using the ruler as a reference
- traced to get the contour
- finish off modelling
A flatbed scanner was used as this does not distort the object when compared to a camera. This results in a more accurate image to trace around. If you really want to use a camera you can purchase a telecentric lens that can cost thousands. I don't have thousands so a flatbed scanner works great!
Scanned image
Telecentric lens
Category: Sport & Outdoors