Screendoor window retainer clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plastic retainer clips to hold the glass portion of a screen door in place.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 1633
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I needed replacement clips to hold the glass into the screendoor frame. The originals were yellow and had snapped with age.
I traced the last clip (yellow) that snapped. Then kind of made a guess as to how big the snapped off portion used to be. I then used Onshape to bring in the image and use a Spline trace to create the first version. I ended up melting the first few prints using a lighter to find the best angles.
After that I kept making the curve in OnShape more acute so that the clips help better and better.
I printed them in PETG and spiral vase mode with a 0.6mm nozzle. This gave them a lot of springiness.