Turntable rotating display stand motorized
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rotating display stand using 28BYJ-48 Stepper motor
- Ocena
- 3 / 5
- Polubienia
- 120
- Pobrania
- 595
- Wydruki
- 2
- Wyświetlenia
- 7149
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Turntables are used to display products while being rotated 360 degrees. There are so many variants but none was suitable for what I needed. So I designed my own.
Software download: https://drive.google.com/drive/folders/1pGM86VKWGcJJjmq1mxFu51o_GeTHhKwG?usp=sharing
This turntable is 200 mm in diameter, it is powered by a 28 BYJ 48 stepper motor (a bit underpowered for heavy loads). For easy rotation I used a 40 mm bearing recovered from a Hard disk drive, an Arduino Nano for controlling the stepper and 4 625 bearings (used in v-slot wheels).
The code allows for the potentiometer to control the speed and direction of the motor. At 50% the motor is stopped and rotating the pot increases the speed in respective direction. Everything is powered from a 5V power supply.