FSR Mounts 2.0 - Rostock Max V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have been trying to set up auto leveling on my Rostock V2 for about a year or so using an inductive sensor. Having…
- Ocena
- 4,5 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have been trying to set up auto leveling on my Rostock V2 for about a year or so using an inductive sensor. Having no luck to date, I resided to give FSR's a go. Found DodgeDerek version and found after 4 or 5 sets that failed do to my luck with printing PETG, either over extruding or just too thin in some area's, I decided to remodel from scratch. I liked the design so I kept it as close as I could. Made the ring around the FSR thicker and changed the plunger to accommodate the stock screws. Also, tightened the dimensions up on the FSR's fit with the silicon spacers. Hooked it all up and all works so far. Now on to firmware and settings.
Unfortunately Ultibots is no longer. But Filastruder as taken over and still has the FSR kit available. Here's the link.
https://www.filastruder.com/products/ultibots-fsr-kit?_pos=1&_sid=f8764bcfb&_ss=r
Print Settings
Printer:
Folger Tech FT-5
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
25%
Filament:
Hatchbox PETGYellow
Category: 3D Printer Parts