Rostock ProStruder Dual Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The is for Dual ProStruder's on my Rostock Max V2. Just another design for my Prometheus System setup. It fits in the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The is for Dual ProStruder's on my Rostock Max V2. Just another design for my Prometheus System setup. It fits in the stock cutout on the top piece. You'll have to install the ProStruders after putting the top piece in place (wire to the motor and tubing to the extruder including the clamp locks). Drilling holes for the tubing was a pain. Should have used a step ladder. Mine are a little off but should work.
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rafts:
No
Supports:
Yes
Resolution:
.25
Infill:
50%
Notes:
Supports from build plate ONLY!
Used ABS
Category: 3D Printer Parts