Rostock Halo Light V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used 6 x 6 magnets. You will need to glue them in place!! Mine fit tight. The 80mm light ring…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Used 6 x 6 magnets. You will need to glue them in place!! Mine fit tight. The 80mm light ring (https://www.amazon.com/gp/product/B00K81B974/ref=oh_aui_detailpage_o04_s02?ie=UTF8&psc=1) also fit tight. may need to file the edges of light. Notice that the magnets are next to the screws on the washers.
Caution: Glue magnets in place!! I had a failed print and I think it was due to the magnets coming out.
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rafts:
No
Supports:
Yes
Resolution:
2.0
Infill:
50
Notes:
Top solid layers 3
Bottom Solid layers 3
Outline/Perimeter shells 3
How I Designed This
Used 123design
Category: 3D Printer Accessories