Sea Turtle Key Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is simply a key hanger suitable for wall mounting with a sea turtle design and two screw holes. It has four posts…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is simply a key hanger suitable for wall mounting with a sea turtle design and two screw holes. It has four posts that are tilted slightly upward so keys don't fall off. If I have time I may someday turn this into a customizeable thing with people's names on it. I printed mine at 70% infill, and it seems to hold keys just fine. This prints without supports because the angle of the pegs is not enough to need it.
Print Settings
Printer Brand:
Robo 3D
Printer:
Rafts:
No
Supports:
No
Resolution:
Medium
Infill:
70%
Notes:
Printed in Light Green PLA
Category: Decor