Gordon Choice 4oz Portion Cup and Lid Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A caddy for keeping 4oz portion cups from finding their way all over the workspace
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 251
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
These cups from GFS come in long flappy sleeves that are a bit unwieldly to deal with, especially since it usually takes us a few years to get through them. This caddy keeps them constrained and out of the way without scattering everywhere when they're bumped into, and I modeled in a few nail holes for a wall mount, if desired.
I went with this height since it'll last us at least three months of frequent use, but you can easily adjust the height up or down in your slicer. If you have any other feature requests, let me know.
Printed in just over 2 hours with a 1mm CHT nozzle, so most nozzle diameters will work fine. Came in at 215g of PETG.