Militech Crusher - Cyberpunk 2077 Gun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my attempt at the Miltech Crusher from Cyberpunk 2077. I referenced screenshots from CDPR and drawings/pics…
- Ocena
- 0 / 5
- Polubienia
- 148
- Pobrania
- 578
- Wydruki
- 0
- Wyświetlenia
- 3080
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
This is my attempt at the Miltech Crusher from Cyberpunk 2077.
I referenced screenshots from CDPR and drawings/pics from Volpin Props. Those guys are awesome, check them out. Modeled in Fusion 360
There is a text file with the bill of material for screws and other hardware(McMaster part numbers). Barrel, grip and rod supports should be attached with adhesive. A rubber band can be used for the trigger hooks.
Hope you like it!
2021_01_24:
-increased ID of bolt by .3 mm to allow easier movement on rod
2020_12_08:
-reduced OD of bolt by .2 mm to allow better clearance in dust cover when painted
-reworked lettering/logo to be easier to print with fdm printers
2020_12_07:
-added part callout drawings and pics of finished build
2020_11_09:
-added missing screw clearance hole to trigger
-oriented parts in recommended printing position
-changed bolt handle to allow printing counterbored hole without supports
Category: Props