1 / 1
Z-Wave smoke detector mount for the Prusa Enclosure — zdjęcie 1

Z-Wave smoke detector mount for the Prusa Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Because fire is bad

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
154
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Designed for the First Alert Model ZCOMBO.  May work with other First Alert detectors.

Screws to the outside top of the enclosure and directs any smoke into the sensor body, note the orientation of the detector to ensure the vent goes directly into the internal sensor.  The internal sensor is usually a black can with vertical vents.

Print with PETG for heat resistance, supports required under the 3 tabs.

Tagi