ZODIAC Misumi DIY y-carriage clipper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy snapable y-carriage LMU8 bearing clipper for your Prusa printer Goal: create less force for a smooth run due to a…
- Ocena
- 5 / 5
- Polubienia
- 80
- Pobrania
- 380
- Wydruki
- 5
- Wyświetlenia
- 3219
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Easy snapable y-carriage LMU8 bearing clipper for your Prusa printer
Goal:
- create less force for a smooth run due to a better force distribution arround the whole reachable bearing surface
- extends the lifetime of your bearings
- due to the design, this clipper has a spring effect and no need to be overtightened
- the two rings fit exactly into the grooves of the bearings and prevent them from slipping in the holder
Materials/ Parts:
Inserts: ruthex M3 insert
Filament: Fiberthree PA-CF lite (Nylon)
Alternative Filament: ABS
Bearing: Misumi LMU8
Screws: Zylinder 2x M3x10mm for each holder
Information:
- Model is optimized for ruthex M3 inserts
- Print direction: as seen in picture
UPDADE 30.11.2020
- added the CAD File
- added the threaded inserts table
Print instructions
Print Settings
Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament_brand:
Fiberthree PA-CF lite
Filament_color:
Black
Filament_material:
PA-CF (Nylon)
Nozzle: ZODIAC PRO series 0.4mm