1 / 2
24V Ride on Gear — zdjęcie 1
1 / 2

24V Ride on Gear

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the Gear Made for a 24V ride on Prints well and is strong In the pictur (Left is original right is print)

Ocena
0 / 5
Polubienia
12
Pobrania
188
Wydruki
0
Wyświetlenia
1326
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

This is a Working Gear for the 24V UTV ride on. If you have a 24V ride on you know what gear this is as it is always the one to go. I could not find on that Printed well so I made this on in 2 separate parts. you can print this as 2 units and hammer them together, that makes the top smaller gear strong enough. I am still Experimenting with strength so print with the strongest material you have.

layer height .15mm

wall line count 4 (I am testing up to 6)

100%infil 

No support

 

I will edit with better versions  as I am experimenting with printing the 2 files on top of each other to start with and separate so I have to hammer them together. 

EDIT: I update the gears for better fit on the shafts. might have to drill out a bit to fit. but it was way to big before.