SCALEPRINT RYOBI ONE MINI CYCLONE MODELLING
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi all Here I have something different from model parts but a small cyclone that fits my Ryobi One vacuum cleaner for…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi all
Here I have something different from model parts but a small cyclone that fits my Ryobi One vacuum cleaner for sucking up the excess sprinkles from my train layout. So they can be re-used elsewhere.
The jar adaptor is clued or screwed to the lid of a jar.
Just change adaptor to suit you suction device.
Has a 20 mm hole in top for suction in and a 13 mm hole in side for inlet tube
about 100 high with adaptor and 70 mm wide.
Ok all printed and works as expected as can be seen in the photo of the jar with sprinkles and not much in the vacuum itself
Print Settings
Printer:
FLASHFORGE CREATER MODIFIED
Supports:
Yes
Resolution:
0.5 NOZZLE .2 LAYER HEIGHT
Post-Printing
ASSEMBLY
JUST GLUE THE PARTS TOGETHER WHEN FINISHED I USED ABS JUICE
Category: Parts