SCALEPRINT CHIMNEY POTS PART 2 00/HO SCALE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello everyone Into the archives again, for the second part of the chimney pots for the tops of your chimneys this…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello everyone
Into the archives again, for the second part of the chimney pots for the tops of your chimneys this thing is all the lovely Tudor Chimney Pots.
I don't have photo's of all the pots,some of the buildings I have given away.
PLEASE NOTE THAT ALL THESE WERE PRINTED ON AN FDM PRINTER.
If you have a SLA or DLP/DUP printer you will get better results.
Don't forget to look at part 1 https://www.thingiverse.com/thing:2797995
Print Settings
Printer:
ORDBOT HADRON
Resolution:
0.2 NOZZLE .1 LAYER HEIGHT
Notes:
ALL THESE WERE PRINTED ON AN FDM PRINTER
I used Simplify3d to slice these models and are able to slow the printer right down to do the very top details, also doing several at one time helps to be able to print the very tops.
Category: Buildings & Structures