SCALEPRINT CHIMNEY POTS PART 1 00/HO SCALE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello everyone Into the archives again, this time I have some smaller chimney pots for the tops of your chimneys. I…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 488
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello everyone
Into the archives again, this time I have some smaller chimney pots for the tops of your chimneys.
I don't have photo's of all the pots,some of the buildings I have given away.
CB-01-CHIMNEY-TOPS.stl has the brickwork for the top of the chimney as part of the print
PLEASE NOTE THAT ALL THESE WERE PRINTED ON AN FDM PRINTER.
If you have a SLA or DLP/DUP printer you will get better results.
Watch out for part 2 of the Chimney pots that will have all my fancy tall Tudor pots
Print Settings
Printer:
ORDBOT HADRON
Resolution:
0.2 NOZZLE .1 LAYER HEIGHT
Notes:
ALL THESE WERE PRINTED ON AN FDM PRINTER
I used Simplify3d to slice these models and are able to slow the printer right down to do the very top details, also doing several at one time helps to be able to print the very tops.
Category: Buildings & Structures