SCALEPRINT GARDEN SHED 00/HO SCALE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Today I have a small model of a garden shed that I created today to go into the garden allotment with about 6 other…
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Today I have a small model of a garden shed that I created today to go into the garden allotment with about 6 other sheds all the same. This is for my 00 train layout.
Comes in 2 versions one with the door open and one with the door closed.
The one with the door closed has the roof removed and standing behind the shed so uncured resin will exit.
This thing as as presented here is set up to suit a resin printer either SLA or DLP. Not sure of results if used on FDM printer
Print Settings
Printer:
Wanhoa D7
Resolution:
0.025mm layer height
Notes:
This model was printed on a Wanhoa D7 using Monocure Rapid Clear resin.
Have to set printer to your resin.
Category: Buildings & Structures