SCALEPRINT CB-19STONE CHIMNEY 00/H0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here we have another of the chimneys for 00/HO models, this one is a stone texture and the base section is 10mm x10mm…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here we have another of the chimneys for 00/HO models, this one is a stone texture and the base section is 10mm x10mm and the top is about 16mm x 16mm, and is about 30 mm tall with a capping. Is printed in 4 parts to get best detail print then glued together after printing. There are 2 different bases one for 45 degree roofs and one for 60 degree roofs plus there are 3 different caps that can be used on the top
I use ABS Acetone mix to glue the parts to the plaster also to glue the plaster together, makes a very versatile glue.
Print Settings
Supports:
Yes
Resolution:
0.2 NOZZLE .1 LAYER HEIGHT
Notes:
I use supports on the 45 degree edges
Category: Buildings & Structures