WIRE JOINER INSULATOR FOR 3MM OD CABLE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a insulator for covering t wire joins in 1mm electrical wire. I primarily designed these for use on my model…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a insulator for covering t wire joins in 1mm electrical wire.
I primarily designed these for use on my model train layout for covering the joins where I have tapped into the main feed wire. I have finally decided that those plastic tapped joins are ugly and wanted something that looked nicer. And this is it.
This model has a centre cavity of 5mm to house the join, I join the 2 halves together using some thick ABS goo, in this case green.
This model is designed for a cable that has a 3mm outside diameter plastic insulation.
Can be scaled up or down to suit other size wires.
May do another that the wires lay against each other.
Print Settings
Printer:
ORDBOT HADRON
Rafts:
No
Supports:
No
Resolution:
0.5 NOZZLE .15 LAYER HEIGHT
Post-Printing
MAY NEED A LITTLE CLEAN UP INSIDE
Category: Electronics