SOUTH BEND LATHE MODEL 9C ( 1937-1940 ) CHANGE GEARS PART 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the second part of a set of change gears for cutting threads on an 8TPI imperial leadscrew lathe these was…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the second part of a set of change gears for cutting threads on an 8TPI imperial leadscrew lathe these was designed for a South Bend lathe model 9C.
The teeth have 14.5 degree pressure angle
The gear has a DP of 18
The module is 1.411
True involute form
are 3/8" wide with a centre bore of 0.5625" key is 1/8"wide
Will put up in sets of 5
This set contains 36,40,44,46,48.
If you have a need for any other gears please let me know and I can look at it for you.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
I used a 0.3
Infill:
100 %
Notes:
the centre hole will print under size so will need cleaning out to fit the shafts
and of course clean up around the teeth.
Category: Machine Tools