SOUTH BEND LATHE MODEL 9C ( 1937-1940 ) 80/63 METRIC TRANSLATION RING GEAR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Metric Translation gear for cutting metric threads on an imperial leadscrew lathe this was designed for a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a Metric Translation gear for cutting metric threads on an imperial leadscrew lathe this was designed for a South Bend lathe model 9C.
The teeth have 14.5 degree pressure angle
The gear has a DP of 18
The module is 1.411
The 63 tooth has an designed inside dia of 75mm but ends up about 74.4mm
The 80 tooth has a designed inside dia of 100mm but ends up about 99.3mm
The 63 tooth ring has 1mm step so it give a gap between the gears so it is 3/8" wide + 1mm
The 80 tooth ring is 3/8" wide which is the width of the standard South Bend gears
It's mainly a space problem that dictates which of the translation gears you use, there may be others but these are the common ones that I know of.
I will be uploading designs for a 127/100 metric translation gear which gives no errors in the generated pitches.
The 80/63 gives an error of 0.0125%
The another gear set 47/37 gives an error of -0.0212%
Print Settings
Rafts:
No
Supports:
No
Resolution:
I used a 0.3
Infill:
100 %
Notes:
The centre I made is of hardwood as that is what I had laying around, but form board or marine ply would probably be a better option.
I turned the timber so that the ABS ring just slipped over then cover with super glue and made sure it ran true before the glue set
Category: Machine Tools