SCALEPRINT WATER WHEEL OVERSHOT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the second of many models that I will be releasing here on Thingiverse that I have designed for 00 scale ( 4mm…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the second of many models that I will be releasing here on Thingiverse that I have designed for 00 scale ( 4mm to the foot, 1:76.2) model railways. Can be also used for HO scale, the majority is British themed but could be used elsewhere.
This one is an overshot waterwheel, printed as a flat pack then glued together.
I have included 2 versions of the paddles a single piece on and a 3 piece on that can be printed flat
It is about 64mm dia and about 25mm wide centre hole is 5mm dia
You need
2 sides 1 left and 1 right
12 paddles
I shall prefix all the designs with SCALEPRINT so you can find them easily
Print Settings
Printer:
ORD BOT HADRON MODIFIED FLASHFORGE
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1, 0.2mm
Infill:
100 %
Notes:
should print ok with a 0.4mm or 0.5 nozzle the resolution is up to you depending what finish is acceptable
Category: Buildings & Structures