POCKET WOOD LATHE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a rework of Crayon Lathe 2 | Open Source TOYS by theevilorverlord. I ended up importing the stl files into my…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 1246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a rework of Crayon Lathe 2 | Open Source TOYS by theevilorverlord.
I ended up importing the stl files into my cad software and used them as a base.
I wanted a simple wood lathe for turning 1:76.2 or 00 or 4mm to the foot.
This design was a good place to start, The head-stock is the same accept I have a direct drive motor for more speed, went to 8mm rods.
The tail-stock have used another head stock for future customization.
The saddle and tool rest a based on my big wood lathe.
All was printed in ABS rod holes had to be cleaned out to fit the rods.
2015-10-27
added some low poly stl files of handles for the sewing machine needles.
I used the 2 part ones and glued together the a mix of acetone and ABS, then opened the hole up to about 1.8mm the warmed the needle and pushed it into the hole.
2015-11-01
Added link to the next in my pocket series of tools a pocket tool grinder to sharpen the tools for this lathe. https://www.printables.com/model/477541-pocket-tool-grinder
PARTS LIST
HEAD-STOCK x2
SADDLE x 1
TOOL-REST 1
4mm cap screws x 2
3mm cap screws x 16
8mm rod 2 pieces of desired length
6mm rod to bend up for tool rest
motor to suit
chuck ( I got mine from Banggood.com )
Category: Machine Tools