1 / 17
Vintage Radio Tissue Dispenser with Small Storage Compartment — zdjęcie 1
1 / 17

Vintage Radio Tissue Dispenser with Small Storage Compartment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A decorative vintage radio piece which holds your tissues and also provide small storage drawer.

Ocena
4,833 / 5
Polubienia
1129
Pobrania
1391
Wydruki
26
Wyświetlenia
11 980
Oceny
24

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

An elegant decorative piece for your home or office desk in the shape of vintage radio.  But it is not just a decorative piece, it can hold regular size tissue box inside for you to be able to dispense tissues and not only that, but it also gives you small storage space.

June 10, 2023 Update

Several parts now have notches to make gluing easier. 

August 15, 2023 Update

After the last update “Walls Top” part was not fitting the MK3S bed. I have uploaded additional file named “Walls Top with Smaller Notch”. This part has smaller notches which will still help in alignment during gluing while fitting on MK3S bed. Print the part on its side while rotated by 35 degrees. 

Printing Tips

“Drawer”, “Walls Top” and “Opening Ring” requires supports on build plate. Everything else prints without any supports.
I have uploaded both OBJ and STL versions of the files. STL version is oriented and placed on the bed such that it will fit Prusa i3 bed size perfectly. But if you have larger printer available, then you can also use OBJ files.
If you like the look of display pics, then print “Back Wall Bottom”, “Back Wall Top”, “Removable Back Wall”, “Front Outer Wall Bottom”, “Front Outer Wall Top”, “Opening Ring” and “Radio Button 1 x2” pieces in different color than rest of the pieces.

Assembly

  1. Glue “Walls Top” & “Walls Bottom”.
  2. Glue “Front Inner Wall Top” & “Front Inner Wall Bottom”.
  3. Glue “Front Outer Wall Top” & “Front Outer Wall Bottom”.
  4. Glue “Front Inner Wall” to “Walls”.
  5. Glue “Front Outer Wall” to “Front Inner Wall”.
  6. Glue two “Radio Button 1 x2” to “Drawer”.
  7. Glue two “Radio Button 2 x2” to “Radio Button 1 x2”.
  8. Insert “Drawer” from front side.
  9. Glue “Drawer Back” to “Drawer”.
  10. Glue “Back Wall Top” & “Back Wall Bottom”.
  11. Glue “Back Wall” to “Walls”.
  12. Glue “Opening Ring” on “Walls” at top.
  13. Insert “Removable Back Wall”.

In order to insert Tissue Box, simply pull out “Removable Back Wall” and once inserted, put back the removable back wall.

Tagi