Playing Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple playing card holder I made for my kids
- Ocena
- 4,927 / 5
- Polubienia
- 802
- Pobrania
- 3263
- Wydruki
- 43
- Wyświetlenia
- 12 293
- Oceny
- 41
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple playing card holder I made for my daughter.
Fusion360 file and short how to change the name in the pictures 💪🏻
Update
Since the top layer is not flat it always printed with small "stairs"
To get rid of this I rotated the X axis in PrusaSlicer 10° upwards and activated supports
This got me a nice top layer, but the bottom was not very even…
My first idea was to use an ironing iron to make it nicer, but since I still had an unopened roll of TPU filament I decided to print an additional layer (thanks to the comment of EGBrader!) to glue on the bottom (2 different .stls are only the diameter of the circles, 12 mm is a very tight fit, I used 11 mm and more glue ^^)
For this I also created small holes in the bottom
Print instructions
I printed it with no supports and 15% infill in Prusament PETG or PLA
The TPU I used was no-name and in PrusaSlicer I selected "Generic FLEX"